32 & 45mm Gauge
£135 (including P&P within the UK - for international shipping contact us here) 
 
Released at Peterborough (June 2022) to celebrate our first year of trading as Boot Lane, Nancy is 16mm scale model, inspired by the Rye & Camber Bagnall tank engine, Victoria and is available in both 45mm & 32mm gauges.
Our 16mm kit is built from 3D printed filament & resin parts, and laser-cut acrylic and utilises our new adaption to the Binnie Engineering 29mm wheel, creating an effective driving wheelset.
It comes complete with a 3-6volt motor, nylon worm gears, Binnie Engineering 29mm wheels on 1/8" stainless steel axles, and all necessary metal stock, nuts, screws & washers required to build the model in the photos.
Also included in the kit is a micro slide switch (with a corresponding laser cut hole in the footplate) and a selection of resin-printed detail parts.
 
We do recommend access to a small "bench vice" to build this kit.
 
Building instructions are included with the kit.
 
The model seems to negotiate 38" curves (45mm & 32mm), although customer feedback would be appreciated. 
However, we have successfully reduced the depth of the pony wheels (removing approx 1.5mm of tread) to allow the 32mm version to negotiate the Peco 30" curves on our garden railway.
 
Although not for beginners, the kit is reasonably easy to construct and requires basic tools, glue, paint and batteries to complete.
There is adequate room in the boiler & tanks for four “AA” batteries or a 3.7V Lipo battery.

Batteries, Loco Remote or any electrics (except micro switch) are not included in the kit.
 
Length (over buffers) - 224mm
Width (across cylinders) - (45mm - 88mm) (32mm - 82mm)
Height (from railhead to chimney top) - 134mm
Rigid Wheelbase – 52mm
 
Display model colours -
Halfords - Matt Black
Halfords - Ford Tuscan Beige
Halfords - Red Oxide