32MM Gauge Only 
£140 (including P&P within the UK - for international shipping contact us here) 
 
Released at Llangollen Garden Railway Festival, May 2023.
St CRISPIN is 16mm scale model, inspired by Corris No 4 - Kerr Stuart "Tattoo" saddle tank.
THIS KIT INCLUDES PARTS TO BUILD EITHER CORRIS NO 4, OR THE TALYLLYN HUNSLET REBUILD IN 1952 WITH CAB OPENING ON BOTH SIDES.
IT ALSO INCLUDES A CAST RESIN CHARACTER FACE. 
Our 16mm kit is built from 3D printed filament & resin parts, and laser-cut acrylic and utilises our new adaption to the Binnie Engineering 29mm wheel, creating an effective driving wheelset.
It comes complete with a 3-6volt motor, nylon worm gears, Binnie Engineering 29mm wheels on 1/8" stainless steel axles, and all necessary metal stock, nuts, screws & washers required to build the model in the photos.
Also included in the kit is a micro slide switch (with a corresponding laser cut hole in the footplate) and a selection of resin-printed detail parts.
 
We do recommend access to a small "bench vice" to build this kit.
 
Building instructions are included with the kit.
 
The model will comfortably negotiate 24" curves or tighter! although customer feedback would be appreciated. 
 
Although not for beginners, the kit is reasonably easy to construct and requires basic tools, glue, paint and batteries to complete.
There is adequate room in the boiler & tanks for four “AA” batteries or a 3.7V Lipo battery.

Batteries, Loco Remote or any electrics (except micro switch) are not included in the kit.
 
Length (over buffers) - 230mm
Width (across cylinders) - 86mm
Height (from railhead to chimney top) - 126mm
Rigid Wheelbase – 48mm
 
Display model colours -
Halfords - Matt Black
Acrylic - RAL 3003